Condor_code_erreur_machine_a_laver_top_loder
Condor erreur code
Condor Top Loading Washing Machine
CWF08-MS33W-G
ML12-MD33G
Error Code: F0
ERROR CODE SOLUTION: Turn off power, wait 5 minutes, turn on power and start washer again.
Error Code: F2
ERROR CODE DEFINITION: EEPROM fail.
ERROR CODE SOLUTION: It needs a Repair. Replace Control Board.
Error Code: E1
ERROR CODE DEFINITION: Not enough water pressure.
ERROR CODE SOLUTION: Make sure to turn on water tap, or increase water flow to washer.
Error Code: E2
ERROR CODE DEFINITION: Draining not finished correctly.
ERROR CODE SOLUTION: Check drain hose, and clear if required.
Error Code: E3
ERROR CODE DEFINITION: Lid not closed.
ERROR CODE SOLUTION: Close lid before it begins to spin.
Error Code: E4
ERROR CODE DEFINITION: Clothing load is out of balance.
ERROR CODE SOLUTION: Move clothes around in drum to balance the machine.
Error Code: F8
ERROR CODE DEFINITION: Water level sensor failed.
ERROR CODE SOLUTION: Remove and replace water level sensor.
Error Code: HU
ERROR CODE DEFINITION: Power Voltage Protection error.
ERROR CODE SOLUTION: Check power incoming to washer.
تعليقات
إرسال تعليق